Authorized Protectowire Linear Heat Detector Dealer

Section 1 PROTECTOWIRE CTI LINEAR HEAT DETECTOR

Standard Packaging Standard packaging consists of 500 ft. (152m), 1000 ft. (305m), and 3281 ft. (1000m) coils/spools. The exact length of wire per coil/spool used to complete each order is at the sole discretion of the Factory. Our policy is to send as few coils/spools as possible based upon stock availability. Cutting Charges - Custom lengths may be requested in 10 ft. increments. The first 5 custom cuts are free. Each additional cut will incur a charge of $12 (USD) NET cut charge. NOTE Each order fulfilled from Amsterdam is subject to a $12 (USD) NET cut charge. Messenger Wire Models Messenger wire is considered a special-order item. Consult factory for lead time. MINIMUM QUANTITY 50 ft. (15 m) PRICES ARE PER FOOT (USD)

TYPE CTI (VINYL JACKET)

TYPE CTI-X (FLUOROPOLYMER JACKET)

NOTE: FOR QUANTITIES ABOVE 15,000 FT (4,570 M) CONSULT FACTORY

Section 2 INTERFACE MODULES

LT LOW TEMPERATURE MODULE WITH NO DISPLAY

**These models require the use of a separately ordered CTMP-1 Programmer REPLACEMENT ENCLOSURE

Section 3 INSTALLATION ACCESSORIES

COMMERCIAL TYPE ZONE / END-OF-LINE JUNCTION BOXES

HEAVY DUTY TYPE ZONE / END-OF-LINE JUNCTION BOX

WIRING ACCESSORIES (CTI PRODUCTS ONLY)

FASTENERS GENERAL PURPOSE APPLICATIONS

Section 4 INSTALLATION ACCESSORIES CONTINUED

CABLE TRAY APPLICATIONS

SPRINKLER PIPE MOUNTING

MESSENGER WIRE APPLICATIONS

TEST EQUIPMENT

THERMOCOUPLE EXTENSION WIRE

DEMO EQUIPMENT

Section 5 GENERAL TERMS & CONDITIONS

Minimum Order: The minimum order is $50.00 net plus freight charges.

Payment Terms: All payments must be made in U.S. Dollars. Customers with established credit: invoices not paid within terms may affect your credit standing with Protectowire and delay processing of future orders. Orders from customers with payment in advance purchase orders will be entered into our system upon receipt of payment in full. Credit cards and irrevocable letters of credit are also accepted.

FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice.

Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange.

Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost.

Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special-order items. Special Order Items are non- returnable and will not be accepted for credit or exchange.

Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages.

Order expediting and special handling may be subject to additional charges. Consult Factory for pricing.

All clerical errors are subject to correction.

Pricing and specification are subject to change.

Section 1 FIRESYSTEM 2000 CONTROL UNIT

SYSTEM CONTROL UNIT: Standard Units include main mother board with control card, Class A/B detection zone card(s) (except FS2000), two Class B audible circuits, ground fault detection, lamp test, and power supply with battery charger and monitor. ENCLOSURES MUST BE SIZED AND PRICED SEPARATELY.

Section 2 2000 SERIES OPTIONS

Select Option Code letter and show quantity when necessary. Options which require enclosure module space(s) must be added to the module space required for the basic panel to determine final enclosure size.

For systems larger than 10 zones, determine Option A price by adding meter switching charge to base option price. When ordering, state number of zones after option code letter as shown above. 1. Base option price $1,050.00. 2. Switching charge No. of metered Protectowire zones x $50.00. Note: switching charge is based on even number zone increments only i.e. 12, 14, 16, etc. and must include all RS-1 Release Module (Option F) initiating circuits used as Protectowire detection zones.

(1 release & 1 initiating circuit/module)

Section 3 2000 SERIES OPTIONS CONTINUED

Size restrictions limit use of Option K to LTi Systems Only.

*Not UL Listed or FM Approved

Alarm Silence, Trouble/Supv. Silence, Reset & Lamp Test.

Not available with LTi2X Enclosure

Section 4 EN SERIES ENCLOSURES

To determine the proper size enclosure, add the module spaces required for the basic control unit plus the module spaces required for the quantity of each option selected from the Option List. Select the enclosure from the sizes shown below. If total module space required for the system exceeds the size of the largest enclosure, a second extender enclosure will be required. Select two enclosures whose total module capacity equal or exceed that required for the system.

LTi INDUSTRIAL ENCLOSURES

NOTE: HEATERS REQUIRE ADDITIONAL MODULE SPACE CONSULT FACTORY

Section 5 BATTERIES AND BATTERY CABINETS

GEL CELL (SEALED LEAD ACID) STOCK AVAILABILITY

Battery Models shown above are designed for mounting inside the EN Series Enclosures. LTi enclosures require a separately ordered battery cabinet. Consult factory for information concerning enclosure venting for internal battery placement.

The following batteries require a separately ordered battery cabinet:

Note: Refer to Gel Cell Battery Selection Data Sheet 8967B or consult factory to determine proper battery size for your particular system.

Section 6 EXPANSION/REPLACEMENT MODULES All module orders must reference the original system s Drawing Number/PWC Job Number or Serial Number. Orders received without this information cannot be processed. Consult the factory for assistance.

*Replacements for systems assembled after July 1, 2010. Replacement parts for systems manufactured prior to July 1, 2010 are limited to inventory on hand. Consult factory prior to ordering.

Section 7 GENERAL TERMS & CONDITIONS

Minimum Order: The minimum order is $50.00 net plus freight charges.

Payment Terms: All payments must be made in U.S. Dollars. Customers with established credit: invoices not paid within terms may affect your credit standing with Protectowire and delay processing of future orders. Orders from customers with payment in advance purchase orders will be entered into our system upon receipt of payment in full. Credit cards and irrevocable letters of credit are also accepted.

FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice. Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange.

Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost.

Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special order items. Special Order Items are non-returnable and will not be accepted for credit or exchange.

Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages.

Control Panel Order Cancellation: A charge will be applied to any formally acknowledged control panel order which is cancelled once engineering design and/or production has begun. The cancellation charge will include all charges incurred up to the date of cancellation. In all cases, the minimum cancellation charge shall be 20% of the net control panel price.

Order expediting and special handling may be subject to additional charges. Consult Factory for pricing.

All clerical errors are subject to correction.

Pricing and specification are subject to change.

Section 1 2600HD SERIES OPTIONS

Select system Option Code letter(s) and show quantity. Note module space(s) required by each option in the system enclosure.

2.0

(Ea. Add l)

1.0

Section 2 2600HD SERIES OPTIONS CONTINUED

for 120VAC Solenoids

for 250VDC Solenoids

Alarm Silence, Trouble/Supervisory Silence & System Reset)

*This option not available on 2600HD2 or HD3 Systems.

**This option not available with system ground fault detection.

Section 3 2600HD CUSTOM OPTIONS

NOTE: Leg Kits are available for some enclosure models. Consult factory for size limitations and pricing.

SPECIAL WIRING PACKAGE INCLUDES CROSS-LINKED POLYETHYLENE FLAME RETARDANT PANEL WIRING & NUMBERED WIRE MARKERS

45 Module Spaces

Section 4 EHD SERIES ENCLOSURES

To determine the proper size enclosure, it is necessary to calculate the total space required by all system components. Begin by adding the number of module spaces required by the basic control unit and power input option in Section 1, and for the quantity of each option selected in Section 2. The sum of these numbers equal the total space required by the system you have configured. Select an enclosure whose total space capacity exceeds this number. If the total module spaces required for the system exceed the size of the largest enclosure, a custom sized enclosure is required. Consult Factory.

NOTE: Due to the custom design features of the 2600HD Series and the potential for system variations requiring ancillary devices not accounted for by standard factory options, all 2600HD system enclosures estimated and/or ordered using this information are considered preliminary and are subject to change upon final Factory review.

Section 5 E2600HD SERIES EXTENDER PANELS

The zone capacity and optional features of the 2600HD Control Panel can be expanded after installation by utilizing an E2600HD System Extender Panel. In its basic form, the extender panel provides additional detection zones only. On large and more complex systems, the Extender can be configured to duplicate many of the same options contained in the main 2600HD Control Panel

Protectowire Alarm Point Location Meter

Protectowire Alarm Point Location Meter

Touch Screen PCLC Graphic Display

Select the Option Code Letter(s) from those listed in Section 2 and show quantity. Determine the size of the Extender s enclosure by calculating the space required by all system components. Finalize complete E2600HD Extender Model Number and total price. SECTION 6 BATTERIES AND BATTERY CABINETS

GEL CELL (SEALED LEAD ACID) STOCK AVAILABILITY

Refer to 2600HD Battery Calculation Sheet, or consult Factory to determine proper battery size required for your particular system. SECTION 7 OPERATION & MAINTENANCE MANUALS / DRAWINGS

Prices for the above described equipment include submittal drawings up to four (4) prints corrected to the customer s requirements. Drawings may be emailed upon request. Three (3) Operation & Maintenance Manuals and three (3) sets of final as built prints will be provided when the equipment is completed. Additional Material:

Section 6 GENERAL TERMS & CONDITIONS

Minimum Order: The minimum order is $50.00 net plus freight charges.

Payment Terms: All payments must be made in U.S. Dollars.

Customers with established credit: invoices not paid within terms may affect your credit standing with Protectowire and delay processing of future orders. Orders from customers with payment in advance purchase orders will be entered into our system upon receipt of payment in full. Credit cards and irrevocable letters of credit are also accepted.

FOB Point: Pembroke, Massachusetts. All shipments are made Ex Works with freight added to Invoice.

Returns: No returns will be accepted without a return authorization. All Non-Warranty returns are subject to a minimum 20% Restocking Charge to cover the cost of handling, inspection, and repacking. Products once installed or placed into service are not subject to return or exchange.

Packaging: All orders will be carefully packaged in accordance with standard commercial practice. Requests for ocean freight and special packaging can be accommodated for an additional charge. Consult Factory for details and cost.

Special Order Items: The Protectowire Company reserves the right to require a non-refundable deposit before ordering or manufacturing any special order items. Special Order Items are non-returnable and will not be accepted for credit or exchange.

Shipping Dates: The Protectowire Company provides an Order Acknowledgement with Estimated Ship Date of every order accepted and processed. All shipping estimates are approximate and are not guaranteed. Failure to ship by the estimated ship date will not be considered sufficient cause for cancellation or damages.

Control Panel Order Cancellation: A charge will be applied to any formally acknowledged control panel order which is cancelled once engineering design and/or production has begun. The cancellation charge will include all charges incurred up to the date of cancellation. In all cases, the minimum cancellation charge shall be 20% of the net control panel price.

Order expediting and special handling may be subject to additional charges. Consult Factory for pricing.

All clerical errors are subject to correction.

Pricing and specification are subject to change.